Garage Doors for Builders and Contractors in Mesa, AZ
Residential garage doors and openers specified from your drawings, measured to the finished opening and installed on your schedule, across the Phoenix metro and beyond. A second-generation family trade in this valley since 1997, ROC #310144.
- ROC #310144
- Licensed, Bonded & Insured
- Women-Owned Family Business
- 90-Day Labor Warranty
- Google Rated

Garage doors have been the family trade in this valley since 1997, and this is the second generation of it. Our about page sets out that history, including which license number covers the job. On your build, the door is a line on a schedule before it is anything else, so this page is about where it sits in the sequence, what the lead time does to it, and exactly where our work stops and someone else's starts.
Where the Door Sits in Your Sequence
This is the ordinary shape of a door package on a build. It is a starting point for a conversation, so tell us how your sequence runs and we will work to it.
Stage of the buildThe door question at that stage
- 1
Drawing
Which standard sizes the design supports, what headroom the door and the opener will want, where the track lands against the framing, and what the ceiling has to carry.
- 2
Framing and finishes complete
The opening as built. It is the only number worth ordering to. Openings move between the plan and the framing, and a door made to a number that no longer exists cannot go back on a shelf.
- 3
After the trades that would mark it
A door installed before drywall and paint is a door that gets marked, and on a custom finish, that is a section replacement rather than a touch-up.
- 4
Handover
The door you ordered is checked against the door that is hanging there, and, if you want it, the release and the sensors are walked through with whoever is taking possession.
The one thing worth deciding early is the specification, because that is what starts a lead time, and the lead time is the part of a door package a schedule notices.
New construction across the Phoenix metroLead Time Is the Thing to Plan Around
Every door on your build carries a lead time from the moment it is specified. Suppliers do not hold the doors, and yours is made only when ordered, so there is no stock to draw on to make up for lost time.
A stock size in a stock color is the quickest thing anybody can specify. Wood, full-view glass, and oversized openings all extend beyond that.
Ask us where the lead time stands, and you have a current date to plan against.
A moved delivery date should reach you from us early. On a build with a dozen trades in sequence, that is the difference between resequencing a week and losing one.
What We Need From You, and What We Do Not Touch
- We need the finished opening, the headroom, the side room, the back room, and what is planned for the ceiling. Storage racks, lighting, and a water heater platform all compete with the horizontal track.
- We need power in the right place before installation day. A new outlet or circuit for an opener has to be an electrician's job before ours.
- We need the structure sound. Header, jambs, blocking for the opener mounts. Where something needs to be done first, you hear it from us at the measure with the reason attached, and we work the date around it.
- What we do not touch: framing, headers and jambs, drywall and stucco. The opener's circuit and outlet are an electrician's, before us. On a build, that division is usually obvious. It is worth having in writing anyway.
What Actually Decides a Door Package
Five questions settle most of a residential door package, and the first four are worth answering before the drawing is finished.
1. Construction. Insulated steel at one end, and wood, full-view glass, and carriage styles at the other. This determines the lead time as much as it does the look, and on a custom home, it is usually the first thing a client has an opinion about.
2. Insulation. A garage that shares a wall with living space, or has a room above it, is a different specification from a garage that does not.
3. The ceiling. Ducting, lighting, storage, or a room above all compete with a ceiling-mounted opener. A wall-mounted jackshaft is usually the answer, and it brings its own requirements, so it is a decision rather than a swap.
4. Whether there is an oversized bay. An RV or boat bay is a different door, a different counterbalance, and often a different opener. Our RV and oversized page covers what changes.
5. Hardware and glass. The part a client changes their mind about latest, and the part that moves a lead time most when they do.
One more comes from our side. A slab that has moved, an opening out of square, a ceiling that will not take a ceiling-mounted opener: you hear that at the measure, while there is still something to be done about it.
Three Things Worth Settling Early
The opening gets framed to a number nobody checked. Two inches off a standard size turns a stock door into a made-to-order door, and it is a decision someone makes without realizing it. Ask us for the standard sizes before the header goes in and the problem disappears.
The ceiling gets committed before the opener is chosen. Ducting, lighting, storage or a room above, and then a ceiling-mounted opener has nowhere to hang and no clear run back. Choosing the opener before the ceiling is committed is the whole of the fix.
Power arrives in the wrong place, or late. The opener needs its own outlet at the location where the opener is going. On a build, that is a five-minute conversation at rough-in and a much longer one afterward.
All three are settled in one conversation at the drawing stage, which is why it pays to call us before the door package is ordered, not after.
What We Supply
Residential doors in every construction we can source. Steel, insulated steel, wood and wood-clad, full-view glass and aluminum, carriage style, and oversized and RV openings. Our new doors and openers hub covers the range.
Openers to match, including belt drive, where a door sits under a bedroom, and jackshaft, where the ceiling is spoken for.
Commercial and dock equipment where a build calls for it. Our commercial hub covers that side.
And repair and warranty work afterward across the metro, on doors we supplied, and on doors we did not.
Questions Builders Ask
Will you hold a specification while a client makes up their mind?
A specification can sit. What moves while a client decides is the delivery date, because the door is built after it is ordered. Come back to us before you order, and we will tell you where things stand.
Can you work to one schedule of finishes across several homes?
Tell us what you are building, and we will tell you what we can do across it. Repeating a size and a finish is the simplest thing anybody can do to a lead time.
Who handles the client at handover?
Whichever you prefer, and it is worth agreeing before the day. We will walk the homeowner through the release and the sensors, or hand the whole thing to you and stay out of it.
Do you warranty a door on a house you did not sell?
Ninety days on our labor, and manufacturer parts warranties honored. The two behave differently when the house sells, and you should know which is which before a buyer asks you. Our ninety days on labor are ours to the person who bought the work, and they do not transfer with the sale of the home. The manufacturer's warranty does carry over to the new owner, on whatever terms the product line provides. So on a spec build, the practical answer is that your buyer inherits the door's warranty and not our labor term, and the cleanest thing you can do is hand the door's paperwork over with the house.
Do you work outside the metro?
We install new doors beyond the valley. Repair and service stop at the metro line. On a build outside it, that is worth agreeing before the doors go on, because it decides who a homeowner calls in year two.
What Customers Say
"At RS Homes, we have been using Quality Overhead Door for all of our garage doors… Their service is wonderful, quality is second to none, very dependable and pricing has always been reasonable. I highly recommend them for all of your garage door needs."
Where We Work
Garage door repair and service across the Phoenix metro:
- Mesa,
- Gilbert,
- Chandler,
- Tempe,
- Scottsdale,
- Phoenix,
- Queen Creek,
- Apache Junction,
- Glendale,
- Peoria,
- Ahwatukee,
- Fountain Hills and
- Paradise Valley.
Send us the drawing while it is still a drawing.
Ten minutes at the design stage is worth more on a door package than anything we can do later.


