Tall sectional doors along a steel building
  • Tall Openings
  • High-Lift and Jackshaft
  • Ordered Per Job
  • ROC #310144

RV & Oversized Garage Doors in Mesa, AZ

Taller garage doors for motorhomes, fifth wheels, boats and lifted trucks, with high-lift track and wall-mount jackshaft openers, measured on site and built to order across Mesa and the Phoenix metro.

  • Women-Owned Family Business
  • ROC #310144
  • Licensed, Bonded & Insured
  • 90-Day Labor Warranty
  • Google Rated
Full-view oversized doors on service bays in Mesa, AZ

If the door you need is taller than the one on a normal house, the conversation starts in a different place. Not with the door. With what is above it.

What Makes a Door "Oversized"

Height, more often than width. A standard residential door is short enough that a motorhome, a fifth wheel, a boat on a trailer, or a lifted truck will not clear it. The width usually already exists; the height is what people are buying.

  • A taller door is also heavier in a way people underestimate. More section area, more weight, and the counterbalance, the shaft, the drums, and the track all scale with it. A door twice the height of a standard one is not twice the job. It is a different specification from the header down.

  • RV garages, shops and detached buildings behave differently from houses. The framing is often simpler, and the ceilings are often higher, which is usually good news, and the structure the opener hangs from is often lighter, which is usually not.

  • Start with the vehicle. Height at the tallest point with everything on the roof, plus a little to spare for the driveway slope. That number is more useful to us than a guess at what the opening should be, and the air conditioner is the thing people forget to include.

The Ceiling Decides More Than the Door Does

This is the part that surprises people, and it is usually why a job this size needs a look before a quote.

Commercial overhead door in Arizona
  1. Headroom is the space above the opening where the torsion shaft, springs, and the curved section of the track have to live. On a tall opening, there is often less left over than on a short one, because the door has already used up the height.

  2. The high-lift track carries the door vertically first, sometimes for several feet, before it turns back into the building. It is how a tall door clears a tall opening, and it needs drums that are a different part with a different profile because the cable has farther to travel. A spring specified for that same door on standard track is not the right spring for it on high lift.

  3. A ceiling-mounted opener needs a clear run and something structural to hang from. In a shop or an RV garage, that run is longer, and the roof structure was frequently not designed to carry an operator and the load it puts through its mounts.

  4. A wall-mounted jackshaft opener sidesteps the ceiling altogether, driving the torsion shaft directly from beside the door. It needs a torsion system and a clear stretch of wall beside the opening; for tall doors, it is often the answer.

  5. Converting a door you already own to high lift, a jackshaft, or both is its own job. Our high-lift and jackshaft conversion page has the eight published prerequisites and the six measurements that decide it.

What We Ask for Before We Come Out

The finished opening, width and height, measured at both sides and the middle.

If they disagree with each other, that is information too.

The distance from the top of the opening to the ceiling, and what the lowest thing up there is: a beam, a duct, a light, or the underside of a sloping roof.

A beam, a duct, a light, or the underside of a sloping roof.

How far back the building goes from the opening, and whether anything is planned for that ceiling later.

Storage racks, lighting, and a water heater platform all compete with the horizontal track, so tell us what is planned up there even if it is not there yet.

What the building is.

An attached RV bay on a house, a detached shop, a barn, a hangar. It changes what the opener can hang from, and it changes the electrical question.

Power, and whether it is where the opener will go.

A new outlet or circuit for an opener has to be an electrician's job before ours.

Repairs on a Door This Size

A repair on a tall door is the same trade as on a short one, though a few things behave differently.

  1. Springs are more of the job. More weight means more stored energy and a counterbalance that has to be exactly right. The whole shaft usually has to come down to change them, so the longer lead time for a longer-life spring is worth planning for.

  2. The failure appears in the bottom corners. Lift cables and bottom brackets carry the door's weight, and a heavier door puts more strain on both of them. A cable that has begun to fray is the one failure on a door this size you can see coming, if anybody looks once a year.

  3. A tall door out of balance is a bigger problem than a short one. It drags, it racks in the track, and it puts an opener that was already working hard into a state it will not survive long.

  4. Parts availability is a real question on older ones. A tall door from twenty years ago may be a size and profile nobody builds now, which turns a section repair into a conversation about the whole door. We identify the door before we promise a part.

  5. The money works the same way it does on any other job. The service call is $85, the estimate comes out of that visit, and no work happens until you have approved it.

What Changes on the Order

  1. These are made to order. A door above standard residential size is built after you approve it, so the lead time is a real item in the plan rather than a formality. Ask us where it stands before you commit to a date.

  2. The choices narrow as the size grows. Not every manufacturer builds every model in every size, or in every construction or finish. On a tall door, the size conversation and the design conversation happen together, which is the opposite of how most people expect to choose.

  3. Insulation does a different job on a tall door. A tall door is a large area of wall, and if the building is a workshop, that area is the difference between a space you use in July and one you do not.

  4. The counterbalance is specified from a weight, not a model number. On a made-to-order door, there is no equivalent door to copy the figures from, so the number has to come from the door itself.

  5. Commercial overhead door in ArizonaRV and oversized doors in Mesa, AZ

What We Do Not Do on This Job

Headers, framing and structure. If a tall opening needs work above or beside it before a door can hang there, that is a job for a carpenter or a contractor, and it happens first. We will identify it and explain why it matters to the door.

  • The opener's power supply. A new outlet or circuit for an opener has to be an electrician's job before ours.

  • And one thing we will not do is talk you out of a small job. There is no minimum here, on a door this size or any other.

RV and Oversized Door FAQ

Can I turn a standard bay into an RV bay?

Sometimes. The question is never the door; it is whether the header can be raised and what is above it. That is framing work; it belongs to a carpenter or a contractor, and it happens before we do anything. We will look and tell you what the door side of it would need.

Will a standard opener lift it?

Often not. The head has to be rated for the finished door's weight, and a step up in size is frequently a different unit and sometimes a different type of opener altogether.

Do you work on RV doors someone else installed?

Any brand, any installer, any age.

My community has to approve the door. When should I ask them?

Before the order goes out. A door this size is built after it is ordered, so late approval holds up everything behind it. Get the size and the finish in front of them while you are still deciding.

Is insulation worth it on a door this size?

If the building is used and not simply parked in, yes, and more than on a house door, because there is more of it. If it is a vehicle cover, a good seal does most of the work.

Do you fit these on new builds?

Yes, and the sooner in the drawing the better, because the opening and the ceiling are both decided long before anybody thinks about a door. Our builders and contractors page covers how that runs.

Do you come out to a shop outside the metro?

It depends which half of the work you mean. We install new doors beyond the valley. Repair and service stop at the metro. So a shop an hour out can have doors from us, and a callback on them is a conversation to have before they go on rather than after.

Where We Work

Garage door repair and service across the Phoenix metro:

See the full service area

Tell us the vehicle's height and the ceiling height.

Those two numbers settle more of this job than the door catalog does.

Commercial overhead door in Arizona