New Garage Doors in Glendale, AZ
Amarr dealer installing new steel, faux-wood, full-view and carriage-style garage doors across Glendale. Free phone quote, $35 measure visit.
A quote over the phone is free. If you want a technician to come and measure the opening, that visit is $35. A service call on a door that has stopped working is $85.
- ROC #310144
- Licensed, Bonded & Insured
- Women-Owned Family Business
- Amarr Dealer
- Google Rated

A new garage door is built for your opening, in your material, color and window layout. We settle the quote, the measurement and any HOA approval first, so the 50% deposit is the last step, not a surprise.
What the Deposit Actually Is
A made-to-order door requires a 50% non-refundable deposit. We say so here as plainly as our new door installation page does, because it is the single most consequential sentence in the transaction and nobody is helped by meeting it late.
The reason is not a policy choice. A door built to your opening, in your material, in your color, with your window layout, is not stock that goes back on a shelf if you change your mind. The factory has already made something that fits one building.
So, the deposit is the moment the job becomes real, and everything this page recommends is about getting the questions answered on the reversible side. A quote over the phone costs nothing. A measure visit is $35.
New door installation in Glendale, AZThe Check Worth Doing Before a Deposit
Before you hand anybody a non-refundable deposit for a made-to-order product, there is one thing to confirm that takes a couple of minutes.
The ROC license. Ours is ROC #310144, and the Arizona Registrar of Contractors will confirm it on its own site without you having to ask us. That is the license that always applies, anywhere in the state.
Glendale's own pages disagree on whether door installers need a city business license. Our Glendale page sets out what each department says. The ROC license above is the one that always applies.
Why the ROC check matters more on this job than on a service call. If a repair goes wrong, you have lost a service call. If a made-to-order door goes wrong, you have lost a deposit on a product that exists, fits one opening, and cannot be resold. The size of what is at risk is what makes a two-minute check worth doing, and that is true of us as much as of anybody.
The Order We Would Want If It Were Our Money
Nothing here is unusual. It is simply the sequence that keeps the irreversible step last.
- 1.
Get the free phone quote first, which narrows down the materials, construction, and rough budget without anyone driving anywhere.
- 2.
Then book the measure visit, if you want one, for $35, where the opening gets measured properly rather than estimated.
We measure width, height, headroom and side room, because all four decide which door and track will fit.
- 3.
Then settle anything that could change the order.
If your property is in a community with architectural rules, that answer comes before the deposit. Submit to your HOA while the door is being quoted, so approval and lead time run side by side.
- 4.
Then read the estimate properly, including the specification of what is being ordered.
A door described as "steel, almond" is not a specification. A door described by model, gauge, construction, finish, window layout, and hardware is.
- 5.
Then authorize.
That is the deposit, and from there the factory is building.
One thing worth saying about that sequence. None of it is designed to slow you down, and we are not trying to talk anybody out of a door. It exists because the questions that change an order are nearly all answerable before the order, and answering them then costs you a phone call. A nasty surprise on a door is rarely the result of bad advice. It is usually the right advice arriving in the wrong order.
What We Raise Before You Commit
Four things, because they are the four that change people's minds and they are better heard early than late.
If the opening needs work first. Where framing, a header, or stucco needs to be addressed before a door goes in, that is a builder's job, not ours, and the order matters. Our Chandler new doors page covers the opening-first case.
If the opening is not a standard size. A non-standard size narrows the models available and can lengthen the lead time.
If the door you want is heavier than what is there now. A heavier door needs springs, and sometimes an opener, matched to its weight.
If your opener will not suit the new door. Often it will. Where it will not, that is a separate line on the estimate rather than a surprise on installation day, and our Glendale opener installation page sets out what a new opener needs here.
What We Actually Sell

We are an Amarr garage door dealer, and Amarr's range covers the constructions our steel, faux-wood, full-view, and carriage pages address. We install and service Clopay as well, and we are not in Clopay's dealer program, which we say because it is checkable.
Each construction has its own page because the differences are real and not about taste alone, and our Glendale page links to all of them. Our custom garage doors page covers the one-off end, and our new door installation page covers insulation, gauge, construction, and what the metro asks of a door.
We do not stock doors. Our suppliers hold them, and each one is built after it is ordered, which is what the deposit pays for. Every door carries the manufacturer's warranty, and our installation labor carries a 90-day warranty.
Scope on This Job
Ours: the door, its track, its counterbalance, its hardware, and the opener.
Outside our scope: framing, headers, jambs, drywall and stucco. A new outlet or circuit for an opener, which is an electrician's job before ours. Locks, handles and rekeying. Garage screens and window retrofits into an existing door. Mobile and manufactured homes. The motor on an opener with no photo eyes. Home warranty dispatch, which is on hold at present. Architectural submissions, when required by the community, are yours to file.
There is no minimum job.
Installation Day

On installation day, we let the old counterbalance down under control before anything is unbolted, then strip the old door and its hardware, measure the opening again before anything goes up, set the new sections with new rollers and hinges, and wind the spring set to the door's calculated weight. Then we balance it by hand with the opener disconnected and test the safety reverse before we leave. Removal and haul-away are settled on the estimate beforehand, not discussed on the day.
Glendale New Door FAQ
Is the deposit really not refundable?
No, it is not, and we would rather you heard that from us at the quote than read it on an estimate. It is 50% of the job, and it is what lets the factory start building something that fits only your opening.
What should the estimate say?
The door itself: model, gauge, construction, finish, window layout, and hardware. If an estimate does not carry those six, it is not describing a specific door. The opener, if one is included, and the old door's removal are separate lines and should be there too.
Do I need a permit to replace a garage door in Glendale?
Usually not for a like-for-like door in the opening it already occupies. It changes if the opening itself changes. Our Glendale page gives the city's own wording and the reasoning behind it, which is worth reading before you order.
How long will it take?
We will tell you the current lead time when you ask, and our new door installation page explains what drives it. We are not going to print a number here that may not be true by the time you read it.
Can I keep my existing opener?
Often, yes, and the point of this page is that the answer is in the estimate before the deposit, not after. Our Glendale opener installation page covers what a new opener needs here. Where the answer is no, it is a separate line you can decide on.
What Customers Say
"Jonie and her team are the best out there."
Where We Work
Garage door repair and service across the Phoenix metro:
- Mesa,
- Gilbert,
- Chandler,
- Tempe,
- Scottsdale,
- Phoenix,
- Queen Creek,
- Apache Junction,
- Glendale,
- Peoria,
- Ahwatukee,
- Fountain Hills and
- Paradise Valley.
Get the free quote first. The deposit should be the last thing that happens.
A phone quote costs nothing, a measure visit is $35, and nothing is ordered until you have authorized it.


