Knotty alder wood garage door with an arched top panel, set in an adobe stucco opening
  • Custom and Wood Doors
  • Wide Openings
  • ROC #310144

Emergency Garage Door Repair in Scottsdale, AZ

Door stuck open, off its track, or hanging after a broken spring? A real person answers our phone after hours, tells you the after-hours rate before anyone is sent, and works to get your Scottsdale garage closed and secure.

  • ROC #310144
  • Licensed, Bonded & Insured
  • Women-Owned Family Business
  • 90-Day Labor Warranty
  • Google Rated
Garage door installed on an Arizona home in Scottsdale, AZ

Our phone is answered by a person after hours. After-hours and weekend work carries a $250 call fee, and you are told before a technician is sent. Saturday visits are available by appointment.

Most emergency calls here are ordinary, and they get dealt with in the ordinary way. A few are not, and the difference is what the door is made of.

When the Part Is Built Instead of Picked

Our Scottsdale page covers the custom door side and the discontinued-section problem. On an emergency call, those two facts stop being background and become the whole shape of the evening.

On a current steel door, a broken part is a short problem. Springs, cables, rollers, drums, boards and sensors are ordinary supply. Whatever happens that night, the repair has a near date.

On a wood, wood-clad, or full-view door, the replacement section does not yet exist. It gets made. That is not a criticism of the door, and it is not anybody being slow; it is what buying a door built to a specification means, and it is the same reason the door looks the way it does.

And on a door from a discontinued line, the part may not be made by anyone. Our Scottsdale page outlines the options when a profile has been removed.

So the question that night is different. On a stock door, it is: finish it, or secure it and come back. On this stock it is: how does this opening work, or at least stay shut, for a wait that could run into weeks?

Garage door installed on an Arizona home in Scottsdale, AZEmergency garage door repair in Scottsdale, AZ

What We Can Actually Do with an Opening That Has to Wait

Here is the realistic list, because the alternative is you finding out one option at a time.

  • Get it closed and secured, hand-operated. In most cases, this is achievable: the counterbalance is repaired or made safe, the opener is disconnected, and the door is operated by hand until the cosmetic part arrives. It is inconvenient, and the house is shut.

  • Get it closed and leave it closed. Where the door can be secured but should not be run, we lock it down and tell you plainly that this bay is out of use until the part comes. On a property with more than one bay, that is usually workable. On a single bay it is a real imposition, and we will say so.

  • Repair the working parts now and the appearance later. A door with a damaged section is often still safe and functional. Springs, cables, track and opener can be put right on the visit, and the section can follow. That is often the best outcome available, and it is not the one people expect to be offered.

Identifying the Door Is the First Delay, Not the Order

People assume the wait starts when the part is ordered. On an older or custom door, it starts earlier, and this is the part you can help with.

  1. Nothing can be sourced until we know what the door is. Manufacturer, model line, section profile, and in some cases the year, because profiles change within a line. Until that is settled, nobody can tell you whether the part is stocked, built, or gone.

  2. The label is usually there, though often hidden. On the inside face of an end stile, on the back of a section, on the bottom bracket, or on the inside of the top section where nobody looks. On a wood or wood-clad door, it is sometimes on the frame behind the door instead.

  3. Photograph the label only if the door is closed and safe to stand near. On a failed or hanging door, leave it to us; a clear label photo sent ahead can save a second visit.

  4. Where there is no label, the hardware tells us most of it. Hinge stampings, the track gauge, the section profile in cross-section, and the bottom bracket design are all identifying features, and between them we can usually put a name to a door. It takes longer than reading a sticker.

And when the answer is that nobody makes it anymore, you are told during the visit, with the options laid out.

What Fails First on a Heavy Door

Lift cables. They carry the door's weight, and a heavier door works them harder. A cable that has begun to fray is a warning, and it is one of the few failures on this list you can see coming if anybody looks at the bottom corners once a year.

Bottom brackets. The cable anchors to them and they sit under the full load of the counterbalance. On a heavy door, this is the fitting we look at hardest.

Hinges between sections, particularly the outer ones. On a wide door, the sections flex more, and the hinges at the ends take it.

Struts across the top section. A wide door needs the top section reinforced so the opener can pull it without bowing. A strut that has worked loose shows up as a door that flexes visibly at the top, and it is easier to deal with before the section takes a set.

What We Are Coming Out For

Garage door installed on an Arizona home in Scottsdale, AZ
  1. A door that will not close. The building is open until somebody closes it, and that outranks everything else here.

  2. A door off its track or hanging. Heavier doors carry more energy into that failure and behave less predictably once they have.

  3. A door down, with a vehicle needed behind it, and no other bay that can get it out.

  4. A door that has been struck. On a heavy or wood door, the damage that matters is often not the damage you can see, and it gets looked at before it gets run again.

  5. A commercial opening that cannot be secured, or a bay taken out of use. Tell us the site and what the equipment is, because commercial work is booked differently from residential work.

Before We Arrive

  1. Stop running it.

    Every failure above gets worse with attempts, and on a heavy door it gets worse faster.

  2. Leave the release cord alone.

    With the counterbalance gone, the carriage above you is carrying the entire door on its own.

  3. Photograph the whole opening from a distance if you can do it safely.

    Do not hunt for the maker's label on a failed door. We will find it when we get there, and the labels tend to live exactly where you should not be standing.

  4. Stay out from under it and keep everyone else out, including when reaching in for something quickly.

    Clear the bay and the one beside it, because on a wide door there is more of it to come down.

  5. And tell us on the phone what the door is made of.

    It changes what goes in the van, and it changes what we can promise before we have seen it.

What We Will Not Promise

  • A real arrival time, given on the phone. We do not print a response time we cannot keep on a busy day. We tell you when a technician can be there before you book.

  • No claim that a custom door gets finished on the visit. We carry the common parts, and a section built to a specification is not one of them. You get the lead time we have from the supplier as soon as we have it.

  • No lead time until the supplier confirms one. If we do not know yet, we will say so and update you as soon as we hear.

  • And the photo-eye boundary does not move for an emergency. No sensors on the head, no work on the motor.

Scottsdale Emergency FAQ

Our door is wood. Should I expect this to take longer?

For the cosmetic part, very likely. For getting the door safe and usable, usually not. Those are two separate questions, and we will keep them separate for you.

Do you charge the after-hours rate if I call at night and book for the morning?

The rate applies to work done after hours. You are told before anyone is dispatched whether it applies to your job.

Can you make the door work by hand until the part arrives?

On most failures, yes, and it is what we aim for. It depends on what failed and what it took with it.

Who do I call about boarding up an opening?

A carpenter or a general contractor. It is outside what we do, and we will say so while we are still standing there rather than leave you to find out.

The house is under a community's architectural rules. Does that slow an emergency repair?

Not for making the door safe and working. It can affect a replacement door or a visible change, and our Scottsdale page covers the sequence that tends to work.

Can you identify our door from a photograph?

Often enough to start. What settles it is the label, and if there is one, we will find it on the visit.

What Customers Say

"Excellent customer service. From the call to the office to the visit from the technician. Friendly and very helpful. I will definitely be using their services in the future."
Brandi T.August 2020
See this review on Google

Where We Work

Garage door repair and service across the Phoenix metro:

See the full service area

Tell us what the door is made of.

Steel, wood, wood-clad, or mostly glass. In a Scottsdale emergency, that answer determines what can realistically be achieved tonight. Office hours are Monday to Friday, 7:00 a.m. to 3:00 p.m.

Garage door installed on an Arizona home in Scottsdale, AZ