Modern garage door in Scottsdale, AZ
  • Measured to the Opening
  • Weighed, Then Specified
  • ROC #310144

New Garage Doors in Scottsdale, AZ

Steel, wood and full-view glass garage doors, measured and specified to your header and ceiling, then installed in Scottsdale. See finishes at our Mesa showroom, Monday to Friday, 7:00 a.m. to 3:00 p.m.

  • ROC #310144
  • Licensed, Bonded & Insured
  • Women-Owned Family Business
  • 90-Day Labor Warranty
  • Google Rated
Modern garage door in Scottsdale, AZ

The door you want and the door your garage was built for are two different questions, and on a Scottsdale replacement, they are often two different answers.

That is not a reason to want less. It is a reason to find out early.

The Building Carries the Door, and a Heavier Door Asks More of It

Our Scottsdale page covers what custom actually means and why the showroom is worth the drive. This page is about the part of the decision that happens above and beside the opening.

  • Start with the fact everybody underestimates. A wood, wood-clad, or full-view glass door can weigh much more than the insulated steel door it replaces. Not a little more.

  • The header carries the counterbalance. On a torsion system, the end bearing plates and the center bracket bolt to the header above the opening, and everything the springs do passes through those fixings into it. A header that has happily carried a light steel door for twenty years is not automatically the header a heavy door needs, and what it is made of matters as much as how deep it is.

  • The jambs carry the vertical track. Track brackets, bearing plates, and the door's load on its rollers all land on the jambs. On a wide opening, more of it lands farther from the framing that supports it.

  • The ceiling carries the horizontal track and the opener. Angle hangers take the back of the track, and something structural has to take them. Add a heavier door and both the static load and the shove every time it starts go up together.

So the question we ask early is what is up there, and on a house where the garage ceiling is finished, nobody knows until somebody looks.

Modern garage door in Scottsdale, AZNew door installation in Scottsdale, AZ

The Hardware Nobody Quotes, and Everybody Lives With

Two doors can be the same model and behave completely differently in year five, and it is usually decided here.

Track gauge. Track is made in different thicknesses. A heavier door needs heavier track, and the difference is invisible in a photograph but obvious after a decade of use, because light track on a heavy door slowly becomes crooked.

Hinges. Sectional door hinges are numbered by position, and the right number in the right place is what keeps the sections traveling together through the curve. Heavier doors need a heavier hinge set, and an underspecified one is something we regularly find.

Rollers. Stem diameter, bearing count, and whether the wheel is steel or nylon. On a heavy door, the roller is carrying more, and it shows sooner, in noise first and in track wear afterward.

Struts. Horizontal reinforcement across a section, particularly the top one the opener pulls on. On a wide or heavy door, a strut is structural, and leaving one out is how a top section takes a permanent bow. It is also the item most likely to be missing on a door installed quickly, because it is the one nobody sees from the outside.

Why We Come and Look Before We Specify

Because the load question cannot be answered from a photograph. What the header is made of, what the ceiling has in it, how the jambs are framed, and what condition all of it is in after thirty years.

Because the answer sometimes involves another trade. Where a header or a ceiling needs work, that is a job for a carpenter or a contractor, and it has to happen before the door. We will identify it, explain why it matters to the door, and hold the date until it is done. A heavy door does not go up on something we can see is inadequate.

And because the specification and the building have to be settled together. Choosing the door first and finding out about the header afterward is the sequence that costs people weeks, and it is avoidable.

Installation Day

  1. The old door and all its hardware come off. Track, hinges, rollers, cables, and counterbalance. A heavier door on the previous door's track is a heavier door on hardware that was never rated for it.

  2. The counterbalance is specified from a weight, not from a model number. The door goes on the scales. On a wood or glass door, the difference between the catalog figure and the door in front of us is worth measuring.

  3. The shaft, drums and bearings are sized with it. Our Scottsdale spring page covers why that matters in a wide opening, and it matters at least as much for a new installation as for a repair.

  4. Balance, then the safety reverse, then the handover. On a heavy door, the balance check is the one that proves the whole specification was right, and the safety reverse is the last thing we do before anybody signs.

The Everyday Scottsdale New Door Call

A page about custom doors gives the wrong impression of what most of this work is, so it is worth saying plainly.

Modern garage door in Scottsdale, AZ
  1. According to Census figures, nearly three in ten Scottsdale homes predate 1980, and our Scottsdale page sets out what that means for the city. The everyday version of this job is a tired steel door on a house from the eighties or nineties, and the building question on those is usually already settled.

  2. The header has already carried a door of roughly this weight for thirty years. The jambs are framed conventionally, and a like-for-like replacement in insulated steel asks nothing new of either. The visit is a measure, a specification and a date.

  3. Where it stops being routine is where the weight changes. Somebody moving from a plain single-skin door to an insulated one with glass is making a smaller version of the same decision this page is about, and it is worth asking one question about.

  4. And on a door from the eighties, there is a second question. Whether the opening is still a size anybody builds to. For the oldest Scottsdale stock, the answer is sometimes no, which turns a replacement into a made-to-order door with a lead time attached.

So the useful summary is this. Where the weight and the opening are unchanged, a Scottsdale new door is a routine job, and where either has changed, it is still straightforward as long as somebody looks up before anybody orders.

Scottsdale New Door FAQ

How much heavier is a wood door than a steel one?

Enough that it changes the springs, the track, the hinges, and sometimes the opener. We will not put a figure on it here because it depends entirely on the construction. The answer comes off the scales.

Our garage ceiling is finished. Does that stop a heavy door?

Almost never on its own. It means somebody has to establish what the hangers can be fixed to, and occasionally that means opening a small area of ceiling. Better to know at the quote.

Can we keep the opener?

Only if it is rated for the finished door's weight and the door balances. On a step-up in weight, the answer is often no, and you should hear that at the start rather than from a head that spends its life at the top of its range.

Does the door need approval before we order?

Where the property sits under community architectural rules, quite possibly. Our Scottsdale page sets out the sequence and what we can give you in writing for a submission.

What about a door that is mostly glass?

We fit them. They are heavy; they are the least forgiving of a counterbalance that is not exactly right, and the hardware set is not the one that comes with a steel door.

Can you replace one door of three and match the other two?

Where the model is still made, yes. Where it is not, the options are a close match that will read as such from the street, or doing the set together. On a frontage where all three are visible at once, we will tell you which of those we think you will be happier with, and then it is your call.

We are building an extension over the garage. Does that change the door?

It can change what the ceiling and the header are doing, and it is much easier to plan the door into that work than to fit one around it afterward. Talk to us while the drawings are still drawings.

Can a heavier door go on the opening we already have?

Usually, and the question is what the opening is fixed into. A header that is adequate for a light steel door is often adequate for an insulated one and sometimes not adequate for wood. That takes a look, which is why we come out before we specify anything.

Does a heavier door need a stronger opener?

It needs one rated for the finished door's weight, and, on a step-up in construction, that is frequently a different unit from the one you have. It is also the reason the door goes on the scales.

Scope

  1. Ours: the door, its track, its counterbalance, its hardware, and the opener.

  2. Outside our scope: headers, framing, jambs, blocking, drywall and stucco. A new outlet or circuit for an opener, which is an electrician's job before ours. Garage screens and window retrofits into an existing door. Mobile and manufactured homes. Home warranty dispatch is on hold at present. Architectural submissions, when a community requires one, are yours to file; we give you the door's specifications, dimensions, and finish in writing, so there is something real in it.

There is no minimum job.

What Customers Say

"Quality Overhead Door has been doing all of our projects exclusively. Our custom homes range in architectural style and budget. They are always able to meet and exceed our expectations!"
Jason SmithSeptember 2017
See this review on Google

Where We Work

Garage door repair and service across the Phoenix metro:

See the full service area

Send us a photograph of the garage ceiling before you send us one of the door you like.

On a heavier door, what is above the opening decides more of the project than the panel design does.

Modern garage door in Scottsdale, AZ